Call us on 0800 666 444
Lines open from 8:30am - 4:30pm weekdays
Condensation is a problem many homes are dealing with, building up on the inside of windows and creating humidity in the home as well as damp and mould and pooling on the window sill which can all cause breathing difficulties over time.
The best treatment for condensation is heating and ventilation to allow moisture-bearing air to escape outside. Heating the room helps keep surfaces above the dew point, while ventilation helps expel warm moisture-laden air to the outside.
Here are some well-known solutions for solving condensation:
Trickle vents are fitted to the tops of window frames and can help create ventilation and reduce condensation. The small opening allows small amounts of ventilation in to help reduce the threat of condensation by allowing this humid air to escape. As double glazing can sometimes contribute to condensation as it prevents air from escaping to keep in warmth – this trickle vent is the perfect solution for retaining heat but maintaining ventilation. Most new windows should have these, or if it is a problem with your current windows, it is worth bringing it up in the consultation process of your new windows. Adding trickle vents to uPVC windows is definitely something worth considering.
To fit a trickle vent to uPVC doors, it’s a very similar process to uPVC windows. Fitting trickle vents will prevent condensation build-ups that could lead to mould growth which can be harmful to your health. Trickle vents prevent airflow when closed, and when open they allow a small amount of air to circulate around the room. They should be fitted so that the window or door can still be opened without being obstructed. Here’s a step by step process on how to fit trickle vents to double glazed products:
• If your windows or doors don’t have a trickle vent or you’re looking for a short term solution, opening a window or door to allow ventilation in can help. However, this is only really viable when you’re at home and during the warmer months.
• Likewise, use the cooker hood and fan when cooking to prevent moisture circulating, particularly when cooking on the hob and using a gas cooker.
• One effective solution is investing in a dehumidifier. You can pick up moisture traps of dehumidifying crystals to put on window sills, which can be a good short term solution and cost-effective as they can often be bought for little more than a pound. Alternatively, invest in an electric one and use it on the low economy setting all the time. When showering, cooking or dealing with damp washing, it’s worth turning the setting up higher to counteract the moisture.
• Avoid drying clothes inside; a rotary line can be a great solution on sunny days as well as energy-efficient. Alternatively, pre-dry clothes in the tumble dryer before or dry them in a well-ventilated area of the home.
• Don’t try to offset the problem with heavy curtains or nets as these can keep the glass cooler and increase condensation.
• If you have mould or damp as a result of the condensation, invest in a good mould and mildew spray to help combat the problem and reduce the threat of lasting damage.
If you’re still scratching your head as to why your home is suffering from condensation or damp, have a look through this alternative list of scenarios. We’ve even listed some solutions to help reduce condensation further.
|Double glazing seal failure e.g. misted units; in between the panes of glass||Replace double glazed units or upgrade to comfort glass|
|Continual mould growth on internal walls||Damp proof course, guttering upgrades or conservatory/orangery tiled roof repair / upgrade|
|Plumbing leaks, e.g. corroded pipes, failing waste pipes, damaged seals||Contact us or visit Trustpilot to find a trusted trader in your area|
|Excess moisture below flooring||Solid floor replacement|
|Condensation in a new-build property||Use an electric dehumidifier for 9 – 18 months|
Condensation can be a real problem if it’s not tackled, so looking into solutions is an important step in protecting your home from damage. But one of the best things you can do for your home is to invest in quality windows to help prevent heat loss and ensure you have trickle vents to provide ventilation. Contact an SEHBAC expert to discuss your requirements further.
We’ve had a few questions recently about Energy Efficient Window Ratings. What are they? What do they mean? How do they affect us?...
What Are Energy Efficient Window Ratings?
A common question we’re asked is do I need planning permission for a conservatory?… With this in mind, we thought we’d start at the very beginning...
Do I need planning permission for a conservatory?
Clad over roofs for conservatories have a tendancy to encourage dreaded condensation, damp and mould...
Conservatory clad over roofs – a catastrophe waiting to happen!
We have the knowledge and experience to provide you with exactly what you need. Our staff are expertly trained to guide and advise you. We offer you a 10 Year Guarantee.
We are one of the largest regional retail companies.
Vetted for professionalism, competency & compliancy